SCS delta 400

Hi Tony
I started by putting back my old (gray) original injectors with which the bike started.
the same, the bike still won't start.
I also reassembled the side stand switch because I had already dismantled it to avoid a source of failure, the bike still does not want to start.
I reassembled the Omex ECU with my original injectors (gray), the bike starts perfectly.
I don't know where to look for the problem
I also specified to scs the year of the motorcycle and the serial number

Regards Eric
Are you hearing the fuel pump priming when you turn on the key ? Have you been able to hook up a laptop to the ecu and check for sensor inputs like TPS and Head Temp etc… Have you pulled your spark plugs and checked for spark when cranking over ? There may be a problem with the SCS ecu or the adapter harness. You should send both back to SCS UK for testing at that point.
 
Are you hearing the fuel pump priming when you turn on the key ? Have you been able to hook up a laptop to the ecu and check for sensor inputs like TPS and Head Temp etc… Have you pulled your spark plugs and checked for spark when cranking over ? There may be a problem with the SCS ecu or the adapter harness. You should send both back to SCS UK for testing at that point.
hello
the pump primes well, there is spark at the spark plugs and by insisting the engine even pushes gasoline into the exhaust tubes.
there, I'm leaving for 5 days I'll see about it when I return to try to connect the bike to a PC with a friend who knows the programming
thank you again I will keep you informed
 
Back
Top