grandpaul
VIP MEMBER
- Joined
- Jan 15, 2008
- Messages
- 13,265
Right side cylinder didn't fully clean up at .020" over, but should be fine; it wasn't smoking the last time it ran. (front faces in view)
Sides are reversed, these are the rear faces of the bores
Bottom of the spigots; sides are reversed (looking at front faces of the bores)
Rear faces of the bottom of the bores.
Sides are reversed, these are the rear faces of the bores
Bottom of the spigots; sides are reversed (looking at front faces of the bores)
Rear faces of the bottom of the bores.