BritTwit
VIP MEMBER
- Joined
- Aug 25, 2009
- Messages
- 3,942
Some forum members have replaced their O2 sensors with resistor plugs and had problems.
I wonder if there is a switch setting in the ecu that tells it to use the default settings, and never adapt?
Thinking about sending my ecu to have it unlocked, and using software to turn off the adapt function.
In default mode, the 961 starts/idles, and runs great even when cold.
I wonder if there is a switch setting in the ecu that tells it to use the default settings, and never adapt?
Thinking about sending my ecu to have it unlocked, and using software to turn off the adapt function.
In default mode, the 961 starts/idles, and runs great even when cold.