what's the best way to make this motor a bit prettiier?

ML · Jan 17, 2012

If you're going to do any rub a dub dub stuff in situ, you will need beer and a radio.

And if the missus says - "what are you doing?" the standard answer is "What you do every morning in front of the mirror".

Mick

DogT · Jan 17, 2012

bill said:
Dave
the factory made it stronger for a reason. I don't think I would push my luck to far with a known issue.

Well, I'm a pretty casual rider. 500 miles this summer and I keep a pretty good eye on everything. Thanks though for much less than $100 the 850 headsteady is easy.

Dave
69S

bill · Jan 17, 2012

dave
when are you going to come over and do our three state ride? you are only a couple hundred miles away and it is GREAT time with some good people.

DogT said:
Well, I'm a pretty casual rider. 500 miles this summer and I keep a pretty good eye on everything. Thanks though for much less than $100 the 850 headsteady is easy.

Dave
69S

DogT · Jan 17, 2012

Windy, I'll see what I can fish out this spring. I can't do TN on the bike from here, it's just too much for me at 69, at least that's what I think. I'd have to trailer or get it in the P/U. I've been down in your area and it's really nice.

We'll see.

Thanks,
Dave
69S

Skyguyz · Jan 17, 2012

what's the best way to make this motor a bit prettiier?

Link:

http://www.chopcult.com/forum/showthread.php?t=2892

Johnnymac · Jan 17, 2012

Hey SkyGuyz, looking great! Where did you get your rocker covers?

batrider · Jan 17, 2012

The fuel lines changed routing and they did away with the crossover pipe somewhere loosely around 1973. It is cleaner looking and you don't have to think about it bursting into flame. Different banjos on the carbs are used and the joining pipe is right at the banjo fittings.

I would say Skyguyz method of making it pretty has a lot going for it.

mikegray660 · Jan 17, 2012

put in a triumph motor? :shock:

rvich · Jan 17, 2012

ML had the answer part right any way...just drink more beer. It works on women, why not a Commando mill?

platinumsmith · Jan 17, 2012

My two cents for making your engine look a little better if that's what you want. Take a hint from skyguyz above. Shine some of your low end like his, maybe some fresh bolts. Black in the middle & clean the top a bit. Leave some "patina". Don't try too much. I think it's the contrast between the shiny parts & the semi shiny with black in the middle that I love.

DL

Matt Spencer · Jan 17, 2012

Pink ribbons and some flowers on it ? ? . Tough , is what it needs to look ! , I 'd stick with the silver ( alloy :lol: :lol: 8) Barrels .

Stainless nut set maybe ?? All the bolts need to be kept EVEN , particularly UNDOING , though .

black cat · Jan 18, 2012

I had my engine soda blasted:

Of course it was easy because I removed the engine for a restoration.

what's the best way to make this motor a bit prettiier?

Similar threads