Discussion in 'Norton Motorcycles (Modern)' started by pingu-nz, Jul 28, 2017.
Probably out of stock . We have to wait.
What I thought, too. My credit card is not charged yet, though...
This is normal practice not to charge you until they have product in hand and send it out.
Cool - I love these guys! I bought a whole set of crash protectors from R & G for my Speed Triple - good quality stuff. Now I am excited about what they offer for Norton.
Hi Paul, do you have a manufacture name and/or part number for the air filter you used in your mod!
here is a link to the filter I used
Thanks Paul it is coming from RAMAIR GB for $24 Canadian..
Did you get your BMC Air Filter yet Raphi ?
Hopefully , Should be coming soon as they now have stock.
When you swapped the three wires were they colour for colour or how did you determine which went with wwhich?
g'day Bill, i've written down the following:
black/white -> orange/white
grey -> blue
green -> brown
i don't have the bike here to check but is coming back to fix the balance gear spring next week if you need further info
That's a damned nice filter.
I should get mine within 3 weeks. Just got an email from R&G...
I have used the PC II on my 1999 VFR800 and can not say enough good stuff about the unit. So I would like to use the PC on the troubled 961. I contacted Dynojet UK to see if I could get any info I could use, this is the response I received and it was from Vicky.
"We did not use a 12-009 unit, I am not sure that the development you are referring to was carried out at Dynojet UK."
I do not know if this is the same Vicky, but if they did not use the 12-009 unit why are we all considering this unit and where is the shop that did use the 12-009 unit!
Hi I am in South Australia and am looking to do same to my 961. Who made the air intake as I would love to do that to mine with the Power Commander, I am just fed up with the erratic running. Cheers Tony (atmain)
I made the air intake out some alloy tread plate.
I was told the standard air filter does supply enough air anyways .
Get hold of a local power commander supplier and they can fit unit and tune a specific map for your bike.
If they need some info get them to contact Steve and powerhouse nerang