click
VIP MEMBER
- Joined
- Dec 27, 2008
- Messages
- 1,010
Hi Guys,
Happy new year!
A mate of mine has a derbi motorbike, see pic attached.
The gear shift has a type of rearset setup, there is a small round tapered splined shaft which has broken & is not available new or used! See pic attached
Two questions:
1 Could the shaft be repaired/welded? it would be a very fine precise weld!!
It’s 12mm diameter & 49mm long
2 could a new shaft be made at reasonable cost? It has ‘normal’ splines on one end & tapered splines on the other
Any help/advice appreciated
Thanks
Kevin
Happy new year!
A mate of mine has a derbi motorbike, see pic attached.
The gear shift has a type of rearset setup, there is a small round tapered splined shaft which has broken & is not available new or used! See pic attached
Two questions:
1 Could the shaft be repaired/welded? it would be a very fine precise weld!!
It’s 12mm diameter & 49mm long
2 could a new shaft be made at reasonable cost? It has ‘normal’ splines on one end & tapered splines on the other
Any help/advice appreciated
Thanks
Kevin
Attachments
Last edited: