1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

tony heyward belt drive

Discussion in 'Other Norton Motorcycles' started by seattle##gs, Jun 11, 2019 at 10:53 PM.

  1. seattle##gs

    seattle##gs

    Joined:
    Oct 28, 2014
    I have a Tony Hayward belt drive in my Atlas and I need a replacement belt. Where is the supplier for these belts. They must be available from a belt manufacturer.
     
  2. Triton Thrasher

    Triton Thrasher

    Joined:
    Feb 10, 2009
    Is there anything written on the belt?
     
  3. Fast Eddie

    Fast Eddie VIP MEMBER

    Joined:
    Oct 4, 2013
    Tony Hayward sells them.

    Sure you might pay a dollar or two more than you would from an industrial wholesaler, but at least you know you’re getting the right belt for the application.

    In my personally experience, Tony’s belts are great. I only ever broke two and they were both because of other issues. Even handled my 900cc 84rwhp Nourish racer without complaint.
     
  4. Matchless

    Matchless

    Joined:
    Dec 23, 2010
    Just don't phone him to order one. That is unless you like being on the phone for at least 45 minutes.
     
  5. Triton Thrasher

    Triton Thrasher

    Joined:
    Feb 10, 2009
    Someone called Seattle##GS may be overseas from Tony’s place.
     
  6. Fast Eddie

    Fast Eddie VIP MEMBER

    Joined:
    Oct 4, 2013
    How do you manage to keep it that short ?!
     
    Matchless likes this.
  7. Fast Eddie

    Fast Eddie VIP MEMBER

    Joined:
    Oct 4, 2013
    Fair point, only a belt tho innit?!

    Shipping will likely be shorter, and cheaper, than the phone call !
     
    Hortons Norton likes this.
  8. dynodave

    dynodave

    Joined:
    May 28, 2003
    Are they not AT-10/polyurethane/ steel cords 32mm wide 10mm/tooth?
    count the teeth
    Something more to it? Atlas different width? 25mm?
    Industrial drive supply warehouse.
     
  9. Triton Thrasher

    Triton Thrasher

    Joined:
    Feb 10, 2009
    My 25-year old Hayward kit is AT10, number of teeth (count ’em), width (measure it).

    Something makes me think newer kits use a different belt.
     
  10. seattle##gs

    seattle##gs

    Joined:
    Oct 28, 2014
    the belt is 25mm wide. There is a new red one to replace it. I do not have the belt anymore, it was almost destroyed.
     

Share This Page