tony heyward belt drive

Joined
Oct 28, 2014
Messages
1,831
Country flag
I have a Tony Hayward belt drive in my Atlas and I need a replacement belt. Where is the supplier for these belts. They must be available from a belt manufacturer.
 
Tony Hayward sells them.

Sure you might pay a dollar or two more than you would from an industrial wholesaler, but at least you know you’re getting the right belt for the application.

In my personally experience, Tony’s belts are great. I only ever broke two and they were both because of other issues. Even handled my 900cc 84rwhp Nourish racer without complaint.
 
Just don't phone him to order one. That is unless you like being on the phone for at least 45 minutes.
 
Tony Hayward sells them.

Sure you might pay a dollar or two more than you would from an industrial wholesaler, but at least you know you’re getting the right belt for the application.

In my personally experience, Tony’s belts are great. I only ever broke two and they were both because of other issues. Even handled my 900cc 84rwhp Nourish racer without complaint.

Someone called Seattle##GS may be overseas from Tony’s place.
 
Are they not AT-10/polyurethane/ steel cords 32mm wide 10mm/tooth?
count the teeth
Something more to it? Atlas different width? 25mm?
Industrial drive supply warehouse.
 
Are they not AT-10/polyurethane/ steel cords 32mm wide 10mm/tooth?
count the teeth
Something more to it? Atlas different width? 25mm?
Industrial drive supply warehouse.

My 25-year old Hayward kit is AT10, number of teeth (count ’em), width (measure it).

Something makes me think newer kits use a different belt.
 
the belt is 25mm wide. There is a new red one to replace it. I do not have the belt anymore, it was almost destroyed.
 
Back
Top