Stuck

richard-7 · Dec 2, 2017

You may wish you had it one day. I would just leave it alone.

Britfan60 · Dec 4, 2017

Ha. It don't work.

Clive · Dec 6, 2017

Hi - seen reference to relays coming loose before - what about something to hold them in place as a new product line for CNW? Maybe a 3d printed clip?

TonyA · Dec 6, 2017

The fuse box cover holds them in place when the foam pad is in there. You can add a piece for the fuses which are also under that same cover. I'm sure all the new bikes have this now. My 2014 has this from the factory. Its the earlier machines say 2013 and earlier which may not have this.

BritTwit · Dec 6, 2017

Mine is 2013 CR and it has the foam pad.

TonyA · Dec 6, 2017

Don't forget to zip tie the fuse box backside connectors to the fuse box also . The connectors can also work loose with vibration . Iwilson posted a picture of this when he did this to his bike and it is a very good idea. I also added the foam to the top of the fuses . I did this to my machine last year, because the vibration can cause lots of issues .

BritTwit · Dec 6, 2017

Foam impressions show that the relays are snug fit.
No impressions from the fuses though, so maybe add a little additional foam in that area.
+1 to plastic tie around cover and frame for extra security.

Hosted on Fotki

Britfan60 · Dec 8, 2017

The ones on my bike that backed out are not in the fuse box. They are 4 black cubes mounted in front of the fuse box. And that tilt sensor did not turn of my bike when My friend dropped it last year. Layed there with the wheel spinning till I turned of the ignition.

contours · Dec 8, 2017

Britfan60 said:
And that tilt sensor did not turn of my bike when My friend dropped it last year. Layed there with the wheel spinning till I turned of the ignition.

Raphi · Dec 8, 2017

Britfan60 said:
The ones on my bike that backed out are not in the fuse box. They are 4 black cubes mounted in front of the fuse box. And that tilt sensor did not turn of my bike when My friend dropped it last year. Layed there with the wheel spinning till I turned of the ignition.

Mine old and new style tilt switch both work. I tested them.
No, not by dropping the bike, but just by turning the switch...

TonyA · Dec 8, 2017

Britfan60 said:
The ones on my bike that backed out are not in the fuse box. They are 4 black cubes mounted in front of the fuse box. And that tilt sensor did not turn of my bike when My friend dropped it last year. Layed there with the wheel spinning till I turned of the ignition.

Can you send along a picture of the area with the relays ? So if you can zip tie those as well.