click
VIP MEMBER
- Joined
- Dec 27, 2008
- Messages
- 1,010
Update:
Got the master cylinder from AN today.
Swopped over the brake light switch & stainless line.
Just went to bleed the system & I have two issues:
1. The bleed nipple is on the RHS of the Lockheed 2696 caliper!! This is a MK3 & the caliper is mounted on the left so the bleed nipple is behind all the spokes in the wheel!!
2. I removed the caliper with the line still attached but can't budge the bleed nipple, I've put penetrating fluid on the threads & I'll leave it overnight.
Hopefully I can get the bleed nipple to turn tomorrow!!
Got the master cylinder from AN today.
Swopped over the brake light switch & stainless line.
Just went to bleed the system & I have two issues:
1. The bleed nipple is on the RHS of the Lockheed 2696 caliper!! This is a MK3 & the caliper is mounted on the left so the bleed nipple is behind all the spokes in the wheel!!
2. I removed the caliper with the line still attached but can't budge the bleed nipple, I've put penetrating fluid on the threads & I'll leave it overnight.
Hopefully I can get the bleed nipple to turn tomorrow!!
Last edited: