Changing Out Fork Gators?

Status
Not open for further replies.
It should only be necessary to drop the sliders off the stanchions (lower, and upper bushes and slider extension) to change the gaiters.
And IMHO it's way better than pulling the tubes. Leaves the yokes in alignment, no chance of screwing up the O-rings holding the fork ears in place, only one bolt per leg to remove.
 
I'm pulling the tubes today to replace the gators.

I might as well change the fluid. Can I just upturn the removed tube and pour out the old fluid?

What is the refill capacity?

Any recommendations on a suitable oil?

I have always used ATF.
Dan,
I would remove the drain plug while you have it removed along with just turning it upside down.The factory book says 150cc. I use 10W RedLine fork oil but that is just a personal preference
Mike
 
I don't know what I had in mine. I changed it, as it was probably 8yrs old. I put Silkolene 20W fork oil in. It transformed the feel. Still comfortable, but much more feedback and precise feel to the bars. It's a personal thing though, just like seat foam.
 
Filled each leg with 5oz of Type F ATF and installed the new short gators.

Changing Out Fork Gators?
 
Status
Not open for further replies.
Back
Top