650 SS Dommi Racer build

Carbonfibre · Oct 22, 2011

Why not polish an alloy tank then give it a coat of epoxy clear coat?

mikegray660 · Oct 22, 2011

Carbonfibre said:
Why not polish an alloy tank then give it a coat of epoxy clear coat?

i had debated that - i'd like to see someone try it

Carbonfibre · Oct 22, 2011

Take a look at the wheels on a high end Merc or BMW........a lot of these are epoxy clear coated, and seem to look very good.

Jeandr · Oct 22, 2011

That is a great looking bike, makes me wish I was working on a bike rather than cleaning up a restaurant my daughter just bought.

Jean

Caferider · Oct 23, 2011

Carbonfibre said:
Why not polish an alloy tank then give it a coat of epoxy clear coat?

Modern Powder coating is far superior to paint or epoxy in durability, chip and chemical resistance, and with ImageFusion they can infuse any graphic or photograph into the coating. I have been talking to a local shop that says they can do the norton tank logo and graphics with a clear coat that will be perfectly clear and seamless. I will just have to have exact dimensions of the logo and placement on the tank.

Here are examples of some of the stuff they have done.

Jeandr said:
That is a great looking bike, makes me wish I was working on a bike rather than cleaning up a restaurant my daughter just bought.Jean

Jean Thanks, I am loving how it looks so far. Sorry that you aren't enjoying cleaning the grease pit, I had to do that once and I could not eat in a restaurant for months after. You can come down and help any time

Is it getting Cold up there yet? It got down to 60F /16C last night and we had to get bundled up, for me that means socks and shoes and long sleeves in the mornings, still shorts its not cold enough for long pants yet.

bwolfie said:
I think we all need a picture of the garage ma hal.

Brian
The wife loves the GarageMaHal comment

She told me I have to keep it clean so she can do some crafting out there ( Cringe) :roll: What ever!!!! Ill Get some pics up once its finished I still have to paint the exterior, sand stain and Polyurethane finish the Arched Carriage house door on the addition.

mikegray660 · Oct 23, 2011

the white w/ the fluorescent pink poka-dots would set you apart from the crowd :shock:

Caferider · Jan 12, 2012

just a quick shot of the progress

ashman · Jan 12, 2012

Very nice Caferider, I am just starting on my 650 build and it will look near the same as what you have here in your pic, but I will be running a open belt drive and my alloy tank will be painted blue.

Ashley

Caferider · Jan 12, 2012

ashman said:
Very nice Caferider, I am just starting on my 650 build and it will look near the same as what you have here in your pic, but I will be running a open belt drive and my alloy tank will be painted blue.

Ashley

Thanks, the 32mm belt kit is on its way, but I'm making a Stock looking fiberglass cover for it.

Bernhard · Jan 16, 2012

Hope you found some alloy to use as heat shields on the exhaust pipes :!:
Given time you will soon be dumping those clip -ons, unless you are going to race it.

Caferider · Jan 16, 2012

Bernhard said:
Hope you found some alloy to use as heat shields on the exhaust pipes :!:
Given time you will soon be dumping those clip -ons, unless you are going to race it.

YES Heat shields are definitely in order...... still working on the design of the exhaust I have 2 Supertrapps and and un-decided if I'm going with 2 mid pipes or 1 high pipe. but after seeing Kenny's bike I fell in love with the look of his Maney exhaust.

650 SS Dommi Racer build

Similar threads