Recommend crank builder uk

Charkmandler

VIP MEMBER
Joined
Nov 6, 2023
Messages
17
Country flag
I'm in the final stages of building my Model 50 race bike. The flywheels were rebuilt by a top tuner a few months ago. Unfortunately on checking them today there is no side clearance for the rod and one side is four thou out of true. The flywheels are push together with no nuts and originally where under half a thou both sides.
Can anyone recommend someone that is good at truing flywheels in the UK. Preferably Yorkshire area although I'm happy to travel anywhere to get them done properly.
Thanks.
 
Charkmandler said:
I'm in the final stages of building my Model 50 race bike. The flywheels were rebuilt by a top tuner a few months ago. Unfortunately on checking them today there is no side clearance for the rod and one side is four thou out of true. The flywheels are push together with no nuts and originally where under half a thou both sides.
Can anyone recommend someone that is good at truing flywheels in the UK. Preferably Yorkshire area although I'm happy to travel anywhere to get them done properly.
Thanks.
Click to expand...
I reckon Paul Henshaw could sort your crankshaft https://www.midlandbullets.co.uk/performance.classics.htm
 
Alpha Bearings did a B40 for me many years ago, remove driveside mainshaft, replace with new one and true.


Website is old so best to phone and see if they will true it up.
 
Last edited:
You must log in or register to reply here.
Back
Top