- Joined
- Mar 18, 2018
- Messages
- 99
Guys, I am looking to order rear paddock stand bobbins for the dominator naked when it eventually arrives,but what is the thread in the swing arm?
Cheers.
Cheers.
Rear paddock stand bobbins
- Thread starter Z1000elderado
- Start date
glb
VIP MEMBER
- Joined
- Sep 21, 2015
- Messages
- 395
They re the same as Yamaha ones. I can check in the morning for you
- Joined
- Mar 18, 2018
- Messages
- 99
glb
VIP MEMBER
- Joined
- Sep 21, 2015
- Messages
- 395
Fairly sure from memory they are M6 size. Just checked R and G https://www.rg-racing.com/browsebike/Norton/Commando_961_Sport/2015/CR0006/#prettyPhoto
- Joined
- Mar 18, 2018
- Messages
- 99
Thanks.
- Joined
- Dec 2, 2009
- Messages
- 64
Hi,
The bobbins come with the bolts. If you order a paddock stand it should come with bobbins and bolts too.
HTH
The bobbins come with the bolts. If you order a paddock stand it should come with bobbins and bolts too.
HTH
- Joined
- Dec 15, 2016
- Messages
- 28
Be aware that the thread on the swing arm will be full of paint, (mine were) So take it easy first time in. May even be worth running a tap through first.
V
Voodooo
Guest
I have bobbins on my commando and not on my Dominator.
What I actually prefer to do is just use a large bolt or a length of bar on each side of the hollow axle shaft. Unless of course you’re removing the wheel.
What I actually prefer to do is just use a large bolt or a length of bar on each side of the hollow axle shaft. Unless of course you’re removing the wheel.
Similar threads
