- Joined
- Feb 3, 2010
- Messages
- 438
Last year I found a P11 basket locally for a 1000$. The frame looked straight but too much was missing to put it back together on a budget. I've always wanted one so I dropped the dough. My MKIII would donate it's power-train to the cause.
I bought and sold on ebay to get to a point that I had something to mock-up.
So here I am now slowly turning it into a roller. The small things, spacers, shims, bearings, adapters, welding and grinding are getting done. Another mock-up to insure myself that I'm on the right track.
Not sure on the stance, might lower it, and the engine/tranny need to move forward to allow clutch clearance.
Will
I bought and sold on ebay to get to a point that I had something to mock-up.
So here I am now slowly turning it into a roller. The small things, spacers, shims, bearings, adapters, welding and grinding are getting done. Another mock-up to insure myself that I'm on the right track.
Not sure on the stance, might lower it, and the engine/tranny need to move forward to allow clutch clearance.
Will