- Joined
- Jan 3, 2008
- Messages
- 329
Does anyone know what designation pads (EBC preffered) fit the 4 pot lockheed caliper> Working on the 750 and decided to use up some of the bits I have lying around the garage to improve the standard brakes. 8)
Lockheed 4 pot caliper pads
- Thread starter Gino Rondelli
- Start date
- Status
Chris
VIP MEMBER
- Joined
- Jan 21, 2008
- Messages
- 1,635
pads
Hi Gino
Do you have the caliper number? Again its not as straight forward as it should be! I am running ex race lockheed calipers that came with brackets for 1990s FZ600 Yamaha. I have looked on the site & the pads are not shown as available. I found some on e bay that looked right. He contacted Lockheed & said although my design was similar it was not the same. He was also informed by Lockheed that later pads have a choice of pads based on the disc thikness ie 3mm or 5mm.
Chris
Hi Gino
Do you have the caliper number? Again its not as straight forward as it should be! I am running ex race lockheed calipers that came with brackets for 1990s FZ600 Yamaha. I have looked on the site & the pads are not shown as available. I found some on e bay that looked right. He contacted Lockheed & said although my design was similar it was not the same. He was also informed by Lockheed that later pads have a choice of pads based on the disc thikness ie 3mm or 5mm.
Chris
- Joined
- Jan 3, 2008
- Messages
- 329
Hi Chris product no is cp3086-106c, just asked EBC tech help for info. :shock:
- Status