- Joined
- Jun 1, 2013
- Messages
- 22
Can anything be done about my Mk3 clutch adjuster (other than selling a kidney to buy a new switchblock.)
Is There Hope?
- Thread starter Uncle Frank
- Start date
- Joined
- Apr 13, 2008
- Messages
- 97
Looks like the quadrant is missing from the adjuster, is it a proper Norton adjuster?Can anything be done about my Mk3 clutch adjuster (other than selling a kidney to buy a new switchblock.)
- Joined
- Jun 1, 2013
- Messages
- 22
I'm not sure - it's what was on the bike when I purchased it.
Fast Eddie
VIP MEMBER
- Joined
- Oct 4, 2013
- Messages
- 21,641
Andover Norton - CABLE ADJUSTER SLEEVE C/W NUT (SINGLE) STEEL/ZINC PLATED - 06.2027
CABLE ADJUSTER SLEEVE C/W NUT (SINGLE) STEEL/ZINC PLATED
andover-norton.co.uk
- Joined
- Nov 20, 2004
- Messages
- 20,443
That wouldn't cure the problem. As others have said that is the wrong (Japanese?) adjuster.
The sleeve should slide inside the bracket and the adjuster wheel holds the adjustment by moving it 180 degrees at a time.
nortonmargie
VIP MEMBER
- Joined
- Jan 16, 2022
- Messages
- 190
I don't understand the cost issue. This is a ten dollar (US) part. Maybe $20 with shipping?
baz
VIP MEMBER
- Joined
- May 26, 2010
- Messages
- 7,930
I believe the original poster thought the whole perch would need replacing
nortonmargie
VIP MEMBER
- Joined
- Jan 16, 2022
- Messages
- 190
I thought a perch was a fish. Very tasty grilled with butter, but lots of little bones.
- Joined
- Jul 7, 2009
- Messages
- 169
Arrgh.
- Joined
- Jun 1, 2013
- Messages
- 22
- Joined
- Jun 1, 2013
- Messages
- 22
Well that was easier than I thought it would be. Thanks all for the feedback
.
.Similar threads
- Poll
