G15 magneto kill switch

Bodger said:

Think you have an Emgo reproduction switch with non Lucas wire colors. Maybe this is helpful https://www.classicbritishspares.com/blogs/news/lucas-31563-handlebar-switch-wiring

Click to expand...

Hi.
No sorry, it is not a reproduction but an original dipper switch.
Piero

texasSlick said:

Refer to the Atlas wiring diagram here:

https://www.accessnorton.com/NortonCommando/early-norton-wiring-diagrams.20232/

IMO, you should connect R (dipper switch) to UR (wiring diagram) and W (dipper switch) to UW (wiring diagram.

Slick

Click to expand...

Hi.
Usually R is ground and W is fire.
Why all the wiring fiagram go from U to UR and UW without the dipper switch wires?.
Piero

Piero:

With a VOM (volt ohm meter), test for continuity from U to R, and then from U to W on the dipper switch. One should be closed, the other open. Then flip the dipper switch and measure again. The closed and open sets should change.

If the dipper switch tests as above, wire the switch as I said in Reply # 20.

Slick

Hi All.
All is now in good work order.
Thank you for your previous advices.
Piero

Hi.
Two questions please:
1. Stator RM19 can be used with zener diod ?.
2. The RM19 stator must be used with his rotor (which?) or with the RM20 also?.
Thank you
Piero