fuse blowing

That's a tough one. Did it actually blow, or just break? Is that a euro 4 bike? if so I don't have a wiring diagram for it, but if you have, see if there is anything else on the same circuit which may have caused the failure if it blew. Has it been ok since?
 
cliffa said:
That's a tough one. Did it actually blow, or just break? Is that a euro 4 bike? if so I don't have a wiring diagram for it, but if you have, see if there is anything else on the same circuit which may have caused the failure if it blew. Has it been ok since?
Click to expand...
not obvious, except metal not continuous. Have bought some new fuse blades. No time to ride since, and I was on way to MOT at the time.... after my Mk3 failed MOT due to sliver of plastic in Carb float valve caused fuel drips earlier that afternoon....
 
cliffa said:
That's a tough one. Did it actually blow, or just break? Is that a euro 4 bike? if so I don't have a wiring diagram for it, but if you have, see if there is anything else on the same circuit which may have caused the failure if it blew. Has it been ok since?
Click to expand...
Sometimes the blade fuses can crack but look ok. Bend the blade inwards and test.
At work we were told to order Bosch blade fuses and doing this stopped a lot of future problems.
 
MAK said:
Sometimes the blade fuses can crack but look ok. Bend the blade inwards and test.
At work we were told to order Bosch blade fuses and doing this stopped a lot of future problems.
Click to expand...
Hi Mak , Can you give us a part number for those 10A BOSCH mini blade fuses ? I can't seem to locate them over here. Thanks .
 
TonyA said:
Hi Mak , Can you give us a part number for those 10A BOSCH mini blade fuses ? I can't seem to locate them over here. Thanks .
Click to expand...
fuse blowing
fuse blowing
fuse blowing
 

Attachments

  • fuse blowing
    EC4C2636-0993-447F-A18E-77DF97EFC833.jpeg
    261.4 KB · Views: 86
You must log in or register to reply here.
Back
Top