Reply to thread

Message

Euro 4 Sport - Had the light on intermittently with the standard pipes and then with the remap when the short noisy pipes were put on. Now have the decats and the noisy pipes with another map and the light is on all the time. Previously a few starts and/or tens of miles would make the light go out. I did 300 miles last week and it stayed on throughout. I mentioned it to Clem last week to see if there was a later map (mine was put on last December) but that drew a blank. I was told that the new lambda sensors are more sensitive to the air at the joint in the pipes nearby so some bikes suffer, some do not. Will have to try and get a perfect joint where the headers meet the decat pipes.

[QUOTE="regental, post: 373292, member: 1795"] Euro 4 Sport - Had the light on intermittently with the standard pipes and then with the remap when the short noisy pipes were put on. Now have the decats and the noisy pipes with another map and the light is on all the time. Previously a few starts and/or tens of miles would make the light go out. I did 300 miles last week and it stayed on throughout. I mentioned it to Clem last week to see if there was a later map (mine was put on last December) but that drew a blank. I was told that the new lambda sensors are more sensitive to the air at the joint in the pipes nearby so some bikes suffer, some do not. Will have to try and get a perfect joint where the headers meet the decat pipes. [/QUOTE]

Verification