ashman
VIP MEMBER
- Joined
- Jul 11, 2010
- Messages
- 6,093

In the last 15 months my Norton sat in my shed without starting while I was doing a few simple mods, adding a small 12 volt battery and a few little things to my PWK carbs, but I had my 2013 Thruxton to ride around on but in the mean time I decidd to upgrade to a new Thruxton 1200S so all work stopped on the Norton and it just sat in the corner in the shed with tank and seat off while enjoying my new ride.
About a 2 weeks if decided to finish off what I started on my Norton and then fired it up, new fresh fuel and a quick kick to get the fuel in while the switch was in the off position then turn on and one big kick it fired straight up, but it was running on one cylinder, a quick check and right side cylinder not firing, turned it off and dropped the carbie bowl drain plug out of the right side carbie and not a drop of fuel in it, so removed seat and tank and pulled the right carbie off, blood hornet built a mud nest in the right carbie where the fuel line connects pulled the bowl off, poked a wire in the fuel connector and a good blow out with compressed air, when I hit it with the air something blew out of the fuel connector and hit my finger it felt like a needle hitting my finger, but was completely clear.
Put it all together was a quick job of about 10 minutes, tank and seat put back on and it fired straight up on both cylinders, not bad for sitting for so long, been a bit busy to take it for a ride but today I took it out for a shake down ride, it felt so good riding it again and ended up doing about 50 miles to make sure it ran good and filled up the tank and back home to make sure primary oil is all good and motor oil at right level.
The Norton ran as good as the day I stopped riding it 15 months ago like its never been laid up.
The Joe Hunt is so good and tomorrow taking it out for the whole day, its great to be on my old Norton, there is something about it that the new Triumph just hasn't got, but I love both bikes.
Ashley
About a 2 weeks if decided to finish off what I started on my Norton and then fired it up, new fresh fuel and a quick kick to get the fuel in while the switch was in the off position then turn on and one big kick it fired straight up, but it was running on one cylinder, a quick check and right side cylinder not firing, turned it off and dropped the carbie bowl drain plug out of the right side carbie and not a drop of fuel in it, so removed seat and tank and pulled the right carbie off, blood hornet built a mud nest in the right carbie where the fuel line connects pulled the bowl off, poked a wire in the fuel connector and a good blow out with compressed air, when I hit it with the air something blew out of the fuel connector and hit my finger it felt like a needle hitting my finger, but was completely clear.
Put it all together was a quick job of about 10 minutes, tank and seat put back on and it fired straight up on both cylinders, not bad for sitting for so long, been a bit busy to take it for a ride but today I took it out for a shake down ride, it felt so good riding it again and ended up doing about 50 miles to make sure it ran good and filled up the tank and back home to make sure primary oil is all good and motor oil at right level.
The Norton ran as good as the day I stopped riding it 15 months ago like its never been laid up.
The Joe Hunt is so good and tomorrow taking it out for the whole day, its great to be on my old Norton, there is something about it that the new Triumph just hasn't got, but I love both bikes.
Ashley
Last edited: