Danno said:I'm not sure what the original size is, but I think I'd use something fine-threaded rather than 1/4-20.
gortnipper said:Danno said:I'm not sure what the original size is, but I think I'd use something fine-threaded rather than 1/4-20.
1/4-20 is the stock size.
Helicoil it I would think.
you would need an M7 tap/bolt if you went metric. M6 is too small and M8 bigger than 5/16.
Danno said:I'm not sure what the original size is, but I think I'd use something fine-threaded rather than 1/4-20.
swooshdave said:TIMESERT, screw that Helicoil crap. It will pull out sooner or later and then you're really fooked.
oil-drain-timesert-repair-t16154.html