Cam chain tension

Status
Not open for further replies.
Joined
May 15, 2009
Messages
100
Hi all, When measuring cam chain free play on mk3 is it just a case of measuring play through the inspection cap without doing anything else or is there more to it Brian
 
Yes, that's all there is to it unless of course you feel that it needs adjusting...............then it's off with the timing cover.

In my experience, probably due to the relatively low milage most of us do these days, adjustment is not normally required.
 
Hi, Sorry what i meant was do you have to load the kickstart or anything like that Brian
 
Turn the engine over slowly using the kickstart or via the backwheel in 4th, aim to get the max slack in the top run where the inspection cap is. The valve spring pressure means the slack can be in the top or bottom run depending on where the engine is in its cycle, plus you can have uneven wear.
 
Status
Not open for further replies.
Back
Top