The parts book shows a front brake cable with a switch ( similar to '70 Commando) for the USA. The service manual I have only shows a modification for the ignition circuit for American markets, nothing about a front brake light switch.
It looks like I could pick up power from the white wire to the coil and run a brown wire back to the otherside of the rear brake light switch but that would look kind of cobbled together.
Any advice as to how to wire in the front brake light switch ?
Thanks
Greg
It looks like I could pick up power from the white wire to the coil and run a brown wire back to the otherside of the rear brake light switch but that would look kind of cobbled together.
Any advice as to how to wire in the front brake light switch ?
Thanks
Greg