hillbone
VIP MEMBER
- Joined
- Aug 24, 2009
- Messages
- 201
Hello again tex.
Have solved the clutch problem. The plates weren't quite flush inside the basket. I checked them and found about 3mm of space were they weren't seated quite right. Seemed to work well after that.
Can you tell me what thread is used on the bottom of the forks that the front guard stays bolt to.?
I have tried a few different bolts with no luck. Hesitant to run any taps through them as they are quite clean and nothing seems to fit.
I'm still playing around with the centre stand spring. We are hoping that when we stretch the spring, the eyelet will rotate. Wishful thinking maybe. Otherwise I'll photo it and send it through.
Cheers hillbone
Have solved the clutch problem. The plates weren't quite flush inside the basket. I checked them and found about 3mm of space were they weren't seated quite right. Seemed to work well after that.
Can you tell me what thread is used on the bottom of the forks that the front guard stays bolt to.?
I have tried a few different bolts with no luck. Hesitant to run any taps through them as they are quite clean and nothing seems to fit.
I'm still playing around with the centre stand spring. We are hoping that when we stretch the spring, the eyelet will rotate. Wishful thinking maybe. Otherwise I'll photo it and send it through.
Cheers hillbone