jms
VIP MEMBER
- Joined
- Jul 26, 2005
- Messages
- 300

Hi
Finally have decided to re-sleeve my Atlas barrel. Just not happy with its condition after honing. Why re-sleeve? Because I have a new set of standard dished pistons with rings that I want to use.
Does anybody here know of a competent machine shop that does this here in Connecticut?
Finally have decided to re-sleeve my Atlas barrel. Just not happy with its condition after honing. Why re-sleeve? Because I have a new set of standard dished pistons with rings that I want to use.
Does anybody here know of a competent machine shop that does this here in Connecticut?