Reply to thread

Thanks for all the responses.  I decided to make the cable myself.  I took some old cables I had, pulled off the cables ends and put the adjuster, clevis loop and cable end on the best of the lot.  Then I started working through the outer cable length.  I made a cable end like the emergency repair ones available on eBay  but with locking setscrews on each side and I was able to cut the outer cable and adjust the cable end until I could establish a workable difference between the inner and outer cable.  Now I am working through some other brake adjustment details. Soon I will fire up the solder pot and finish the cable.  Once I get it all finished I will probably order a lined custom cable from Venhill and keep mine as a spare.

Thanks again for your advice and suggestions.

Dave