Incoming - Aluminum Fuel Tank for my Dominator

I was just wondering; why doesn't Norton just build the alum tank with an integral Monza cap?:confused:
It would eliminate the need for the screw-in Monza cap assembly all together.
Maybe I shouldn't ask.
If they did this it would just give me even more motivation to buy one.
 
Norton don’t sell the caps, Rob just told me. So guys, where are you getting your Monza caps from and how do they fit on (ie, are they threaded)?
 
I just got a shipping notice from UPS from AF1 for 14lbs. Its on its way
 
its here. Shiny,fingerprint magnet. Black foam protection already applied.

Incoming -  Aluminum Fuel Tank for my Dominator


Incoming -  Aluminum Fuel Tank for my Dominator
 
Yup ! Its a beauty. Please let us know how may gallons of gas to fill it up .
 
Incoming -  Aluminum Fuel Tank for my Dominator
Here’s the cap and part number I used on my aluminum Norton tanks.

Type in:
83-5201B in yahoo, google or eBay and you’ll find the cap.

It comes with a rubber gasket but I used a spin on oil filter gasket instead because it’s thicker and allowed me to screw on the cap and to position it where I wanted it. Seals great and not a single leak.
 
This thread is a timely reminder that I still have a Winter project for the 961... but 'tis just a month or so from the start of the riding season... where has the Winter gone!!!!
 
This thread is a timely reminder that I still have a Winter project for the 961... but 'tis just a month or so from the start of the riding season... where has the Winter gone!!!!

Best pull tha finger out then...
 
Best pull tha finger out then...
Finger is out all the way, even given up smoking to save a few precious minutes lol

My 'other' Winter project has had so many niggling setbacks but at least I am now on the bolt-it-all-together part of the project so should be all down hill now.
 
My alloy tank envy was only resolved once I got one... and the Monza cap, I just can't decide whether to polish or paint :)

I vote for polishing.
Put some painters tape over the Norton logos.
Then have at it with a polishing wheel, drill and some good alloy polish.
Bada bing, bada boom, done.
 
My alloy tank envy was only resolved once I got one... and the Monza cap, I just can't decide whether to polish or paint :)

I understand the dilemma - if polished then you need to do something with the tail to match it. If painted then you need to buy another to polish and put on a display stand in your living room.
 
Nice Tank, What are you going to line it with to protect against acid ethanol attack??.
Its still in the box so I havent thought about it. I'm so far behind on everything but I'll get to it one of these days. TBH I didnt think ethanol had any effect on Aluminium tanks? I know some of the Ducati guys were switching to aluminium tanks when their plastic tanks were expanding so I thought Aluminium was the fix.
 
Its still in the box so I havent thought about it. I'm so far behind on everything but I'll get to it one of these days. TBH I didnt think ethanol had any effect on Aluminium tanks? I know some of the Ducati guys were switching to aluminium tanks when their plastic tanks were expanding so I thought Aluminium was the fix.

An alloy tank is way better than the nylon; the tank distortion can start very early on depending on fuel, storage, fuel level when stored etc. . Some are lucky enough to get away with it for years but one bad effect is the fuel pump flange mounting distorting and dumping petrol onto your garage floor. Nice.
 
Back
Top