Your experience with ECUTune on EFI-equipped Triumph? Or, how did you synch your EFI?

I've purchased a 2012 Triumph Thruxton and am going through it now. One area I want to understand is how to synch the EFI on this bike. I have gone through the Triumph Rat / Triumph Forum and other sites but would like to know if anyone on our forum has done this work and if they used ECUTune or similar to do this? Huge thanks, loving the bike!

Jdub said:

I've purchased a 2012 Triumph Thruxton and am going through it now. One area I want to understand is how to synch the EFI on this bike. I have gone through the Triumph Rat / Triumph Forum and other sites but would like to know if anyone on our forum has done this work and if they used ECUTune or similar to do this? Huge thanks, loving the bike!

Click to expand...

I've done my Rocket III, as well as my Tiger 1050.

I assume you mean sync the throttle bodies?
Set the baseline TPS value?

TuneECU, I simply followed the directions.

Very clear, intuitive.

I also loaded a higher performance map (AKA: "tune") and they both SCREAM and HOLLAR!

TuneECU is only supported on Android opsys. I had to buy a tablet last time around.

Thanks, the website at https://tuneecu.net/index.html is what I am working through. However, this site may have all the information I need (https://tuneecu.fr/)? The license is good for five bikes over a single year and I am not sure what other uses the cord, wireless fob, and the rest will be applicable to.

Thanks for your input much appreciated!

Jdub said:

Thanks, the website at https://tuneecu.net/index.html is what I am working through. However, this site may have all the information I need (https://tuneecu.fr/)? The license is good for five bikes over a single year and I am not sure what other uses the cord, wireless fob, and the rest will be applicable to.

Thanks for your input much appreciated!

Click to expand...

Bluetooth wireless OBDII

I'm using TuneECU on my 2017 Tiger 800. I use a Bluetooth OBDII (OBDLink) to connect to the app on my android phone.
I just did the 12k mile service which required tuning the throttle bodies. It was a matter of connecting the OBDII to the bike, Bluetooth connection to the app, start the bike and watch the gauges on the app. Adjustments were made on each throttle body until balanced.
There are a few youtube videos showing the process for a Tiger 800. I understand you're on a different bike but it may be helpful to you.