WTB - Original parts for '70 Fastback survivor

elefantrider

VIP MEMBER
Joined
Apr 6, 2013
Messages
1,076
Country flag
I like survivor bikes but I don't like rusty or pitted parts.

Much of this bike has cleaned up pretty well now but some parts have not.

Looking for the following original parts, either absent or in too poor condition on mine.

-Fork top nuts and center nut with better chrome
-Chrome screw-in fork extensions, at least one is needed
-Fork piston rods
-Fastback headlamp brackets with better chrome or original black from an earlier bike.
-Good downpipes with rose nuts and clamps.
-Peashooter silencers and vertical brackets
-Chrome fender stays
-Fastback seat
-Fastback license plate holder
-Handlebar
-Shrouded shocks
-Chrome TLS brake arm hardware & screen


Please send me a PM if you got anything.

00R0R_4WBDgCiiTC4_0t20lM_1200x900.jpg



00S0S_JWZaEcE7JS_0CI0t2_1200x900.jpg
 
Last edited:

grandpaul

VIP MEMBER
Joined
Jan 15, 2008
Messages
11,741
Country flag
I need the O.D. and TPI on the fork top nuts.

I possibly have 2 pairs to choose from, just need to be sure.
 

jimbo

VIP MEMBER
Joined
Sep 25, 2004
Messages
1,744
Country flag
I have a set of original exhaust pipes, they are upswept and have the part numbers on them, They have the kick in right close to the head , the aftermarket ones do not have that.
 
Joined
Feb 5, 2009
Messages
52
Country flag
I like survivor bikes but I don't like rusty or pitted parts.

Much of this bike has cleaned up pretty well now but some parts have not.

Looking for the following original parts, either absent or in too poor condition on mine.

-Fork top nuts and center nut with better chrome
-Chrome screw-in fork extensions, at least one is needed
-Fork piston rods
-Fastback headlamp brackets with better chrome or original black from an earlier bike.
-Good downpipes with rose nuts and clamps.
-Peashooter silencers and vertical brackets
-Chrome fender stays
-Fastback seat
-Fastback license plate holder
-Handlebar
-Shrouded shocks
-Chrome TLS brake arm hardware & screen
I have a NOS Fastback License Plate holder, probably too nice for that survivor.
 

elefantrider

VIP MEMBER
Joined
Apr 6, 2013
Messages
1,076
Country flag
Change of direction. Bike is a bit too rough to keep as a survivor.
It is hard to look at dull parts with new fireflake paint and new exhaust.
Parts will be going out to the polishers , and for cad plate.
Wheels will be re-done.

Lookng for a pair of early silencers as everyone is out of stock.:

 
Last edited:

jimbo

VIP MEMBER
Joined
Sep 25, 2004
Messages
1,744
Country flag
Change of direction. Bike is a bit too rough to keep as a survivor.
It is hard to look at dull parts with new fireflake paint and new exhaust.
Parts will be going out to the polishers , and for cad plate.
Wheels will be re-done.

Lookng for a pair of early silencers as everyone is out of stock.:


Armours

 
Joined
Feb 28, 2007
Messages
32
Country flag
I like survivor bikes but I don't like rusty or pitted parts.

Much of this bike has cleaned up pretty well now but some parts have not.

Looking for the following original parts, either absent or in too poor condition on mine.

-Fork top nuts and center nut with better chrome
-Chrome screw-in fork extensions, at least one is needed
-Fork piston rods
-Fastback headlamp brackets with better chrome or original black from an earlier bike.
-Good downpipes with rose nuts and clamps.
-Peashooter silencers and vertical brackets
-Chrome fender stays
-Fastback seat
-Fastback license plate holder
-Handlebar
-Shrouded shocks
-Chrome TLS brake arm hardware & screen


Please send me a PM if you got anything.

View attachment 21892


View attachment 21893
I have a license plate panel listed on eBay. teamtiger21
 

elefantrider

VIP MEMBER
Joined
Apr 6, 2013
Messages
1,076
Country flag
Armours


Thanks Jim, I've sent an email off to Armours. Surprised they don't have left and right part numbers. Their website just says order 2 if you need a pair. :eek:

Perhaps someone here as experience with these from Armours.
 
Last edited:
Joined
Feb 6, 2012
Messages
22
Country flag
I like survivor bikes but I don't like rusty or pitted parts.

Much of this bike has cleaned up pretty well now but some parts have not.

Looking for the following original parts, either absent or in too poor condition on mine.

-Fork top nuts and center nut with better chrome
-Chrome screw-in fork extensions, at least one is needed
-Fork piston rods
-Fastback headlamp brackets with better chrome or original black from an earlier bike.
-Good downpipes with rose nuts and clamps.
-Peashooter silencers and vertical brackets
-Chrome fender stays
-Fastback seat
-Fastback license plate holder
-Handlebar
-Shrouded shocks
-Chrome TLS brake arm hardware & screen


Please send me a PM if you got anything.

View attachment 21892


View attachment 21893
I have a decent used H/L bucket $40 USD ($50 CDN) and new Hagons with covers $200 USD ($250 CDN)
 
Top