Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Nothing more annoying than pulling a stud from a freshly rebuilt engine.No matter how good they look, I always helicoil ( or insert) the 3 stud holes.The std studs are too short: not enough thread on both ends.You can make longer studs from head bolts.Helicoils are ok, but with inserts, you have the choice of threads.I use M14 x 2 mm.Comstock is THE man, but I hear from turnaround times of several months.It takes me a few hours for the 3 studs + inserts.It's not that hard to do..
Nothing more annoying than pulling a stud from a freshly rebuilt engine.
No matter how good they look, I always helicoil ( or insert) the 3 stud holes.
The std studs are too short: not enough thread on both ends.
You can make longer studs from head bolts.
Helicoils are ok, but with inserts, you have the choice of threads.
I use M14 x 2 mm.
Comstock is THE man, but I hear from turnaround times of several months.
It takes me a few hours for the 3 studs + inserts.
It's not that hard to do..
