Whitworth or UNC
- Thread starter baz
- Start date
- Status
- Joined
- Oct 28, 2014
- Messages
- 2,042
UNC
- Joined
- Nov 20, 2004
- Messages
- 20,582
Studs (not bolts).
Motorcycle parts and spares for Norton motorbikes - Andover Norton Spare Parts - Andover Norton Motorcycles Parts - Original Andover Norton Parts
Motorcycle parts and spares for Andover Norton motorbikes: Andover Norton manufactures and supplies all Factory Spare Parts for Norton motorcycles built before 2002.
andover-norton.co.uk
However, (for pre-850 Mk3) there are normally five 5/16" UNC/UNF studs and one 5/16" UNC hex/setscrew (for the Zener earth ring terminal and 06.1247 UNC nut).
Motorcycle parts and spares for Norton motorbikes - Andover Norton Spare Parts - Andover Norton Motorcycles Parts - Original Andover Norton Parts
Motorcycle parts and spares for Andover Norton motorbikes: Andover Norton manufactures and supplies all Factory Spare Parts for Norton motorcycles built before 2002.
andover-norton.co.uk
Andover Norton Parts Drawings - Andover Norton Factory Parts - Commando Parts
Andover Norton Parts are the only Norton spare parts in the market manufactured to original drawings, within the factory-approved tolerances, from the correct materials, and with the correct finish.
andover-norton.co.uk
- Joined
- Nov 17, 2010
- Messages
- 610
Depends on the year. My 72 Commando has 6 bolts, not studs.
baz
VIP MEMBER
- Joined
- May 26, 2010
- Messages
- 8,159
Yep I know it was studs originallyStuds (not bolts).
Motorcycle parts and spares for Norton motorbikes - Andover Norton Spare Parts - Andover Norton Motorcycles Parts - Original Andover Norton Parts
Motorcycle parts and spares for Andover Norton motorbikes: Andover Norton manufactures and supplies all Factory Spare Parts for Norton motorcycles built before 2002.andover-norton.co.uk
However, (for pre-850 Mk3) there are normally five 5/16" UNC/UNF studs and one 5/16" UNC hex/setscrew (for the Zener earth ring terminal and 06.1247 UNC nut).
Motorcycle parts and spares for Norton motorbikes - Andover Norton Spare Parts - Andover Norton Motorcycles Parts - Original Andover Norton Parts
Motorcycle parts and spares for Andover Norton motorbikes: Andover Norton manufactures and supplies all Factory Spare Parts for Norton motorcycles built before 2002.andover-norton.co.ukAndover Norton Parts Drawings - Andover Norton Factory Parts - Commando Parts
Andover Norton Parts are the only Norton spare parts in the market manufactured to original drawings, within the factory-approved tolerances, from the correct materials, and with the correct finish.andover-norton.co.uk
Cheers
- Joined
- Nov 20, 2004
- Messages
- 20,582
1972, Group 12.
5 studs, one "bolt".
Also '70, & '71 and most '69.
'68 (and early '69 Fastback) had six studs before the Zener was moved to the Z-plate so five studs and one bolt from the '69 S and R types/131257 to the 850 Mk2/2A. Mk3 had two studs and four "bolts" one of which was a set screw.
Last edited:
- Joined
- Nov 17, 2010
- Messages
- 610
Well the information isn't accurate. I've owned my bike from new.
I used bolts loosely to distinguish from studs, they are set screws.
Last edited:
- Joined
- Nov 20, 2004
- Messages
- 20,582
More likely ran out of studs that day/week/month as it's unlikely the factory changed from studs to bolts for '72 and then back to studs again.
Cuppy
VIP MEMBER
- Joined
- May 27, 2022
- Messages
- 120
My 72 Commando has 3 studs on LH and 2 studs and a bolt oh RH.
- Status
