White Purple Wires on MK3

I am trying to clean up my wiring under the tank a little. I have fitted TriSpark, 12v dual coil, and have removed the condenser and ballast resister. I have also disconnected WP from the starter solenoid.
Now I have a lot of open ended (unused?) WP wires. Can I remove all the WPs without affecting any other functions?
Thanks,
Jaydee

According to the manual you've got one white/purple from solenoid to coil and one from ballast resistor to same coil terminal, so that's only two free connectors. Still require w/p link wire between the two coils. Sorry, just realised you've now only one coil so that'll be 4 free terminals. In fact re-reading your question again do you still have the electric start? If so you'll need the w/p from solenoid otherwise the bike wont start - I think.

jaydee75 said:

I have fitted TriSpark

Now I have a lot of open ended (unused?) WP wires. Can I remove all the WPs without affecting any other functions?

Click to expand...

Yes.

The WP (ballast resistor bypass) wiring must, at least, be disconnected if any type of electronic ignition is fitted.