Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Here's one from the cheap end of town...Found an old orphan socket (5/8" Stahlwille) that fitted nicely into the points seal cavity (23.0mm vs 23.7mm hole)Sanded the drive end with a bench sander and hand sanded the sharp edge (5 minutes work)Worked beautifully [ATTACH]108587[/ATTACH]The crankshaft seal won't need to be as "square" due to the orientation of the seal - pressing on the steel side....just got to remember which one for next time!
Here's one from the cheap end of town...
Found an old orphan socket (5/8" Stahlwille) that fitted nicely into the points seal cavity (23.0mm vs 23.7mm hole)
Sanded the drive end with a bench sander and hand sanded the sharp edge (5 minutes work)
Worked beautifully
[ATTACH]108587[/ATTACH]
The crankshaft seal won't need to be as "square" due to the orientation of the seal - pressing on the steel side.
...just got to remember which one for next time!
