- Joined
- Sep 22, 2018
- Messages
- 115
ok so getting on with the flat bar conversion. issues so far
managed to get another top you so had it milled out and two plugs welded in to accept the risers. on trying to fit i had to grind off the underside wear the plugs had been welded as they was hitting the headstock, the plugs couldnt have gone out any further as the bends on the bars start.
fitted the longer throtle cables and managed to snap one at the adjuster, really soft metal
ordered longer brake and clutch lines from Norton, but unfortunatly they sent standard ones
managed to get another top you so had it milled out and two plugs welded in to accept the risers. on trying to fit i had to grind off the underside wear the plugs had been welded as they was hitting the headstock, the plugs couldnt have gone out any further as the bends on the bars start.
fitted the longer throtle cables and managed to snap one at the adjuster, really soft metal
ordered longer brake and clutch lines from Norton, but unfortunatly they sent standard ones