Reply to thread

In the above picture, you can see that on the "cut off" T160 leg bolted behind the T140 stand the stop protruding above the circular top of the T140 stand. This is what is used on a T160 to position the T160 stand when retracted. The T140 "stand stop" is the"ledge" below the bolt on the T140 stand. Unfortunately, the T140 fame is different here to the T160 frame so will not stop the stand when retracted in the correct position. The solution here is either to use the T150 main stand stop plate, or get two lugs welded onto the T140 stand to the same height and shape. I hope this makes sense.