SCS Software Logging

Hi All,

I have a 2015 sport with around 9000 k's on it. My ownership of the bike is onto it's third tank of fuel.

After reading the information here - I've gone ahead and bought a few things, one of them being the SCS Data connection. I've also ordered a few bosch sensors, ignition coil etc.

I've used the logging in that software and was wondering if anyone else had? I believed it may be useful to compare some of the sensor data.

I figured with some data of what the readings are from a bike working right, or before and after a sensor change, it might help for troubleshooting in the future?

For those who haven't seen what comes from the software's logging function - this is the data in excel:

Hello Gojuu , I have never look at this in excel . I look forward to your progress though. Just a few questions for you . Are you using SXCar or SXTune ? Are you running the original SC Typhoon ECU or the SCS Delta 400 ? And if you are still using the original Typhoon is it unlocked ? Thanks Tony.

TonyA - my bike has a Typhoon and I’m just using the SXCar software. I haven’t done anything that shouldn’t be possible on an unmodified bike.

There is a button in the top right of the software interface that says “record”. When you click that it logs the data, when you click it again to finish recording, it saves the data to a csv file on the PC.

Both SXTune and SXCar have logging functions but SXTune has a real time graph that you can look at while tuning if needed.

Using the SCS Data connection and logging software can be really valuable for understanding your bike's performance.

Comparing sensor data before and after a change is a smart move. It not only helps with troubleshooting but also gives you a deeper insight into your bike's health. Sharing that Excel data with the community can be super helpful for others too!

Good luck with that. They think they want FCRs………