Ready to start

Status
Not open for further replies.
Joined
Nov 20, 2020
Messages
59
Country flag
I’m about ready to try and start Norton after rebuild (top end only). Is there anything I need to do or to check prior to starting?
Thanks
 
I'm not a pro but I take the plugs out and kick it over till I see oil returning to the oil tank. Then put in plugs and start!
 
Dunno how much top end work you've do, but if engine has been unused a long time remove exhaust tappet covers and squirt oil in there to lube cam & followers .
 
Status
Not open for further replies.
Back
Top