- Joined
- Apr 6, 2013
- Messages
- 1,404
Looking for the original type gaiter wire clamp with the slotted ROUND screw head. Anyone have a source. I only need one lower (smaller diameter one). Old patina OK.
Last edited:
P11 Gaiter clamps, original type
- Thread starter elefantrider
- Start date
- Joined
- Apr 6, 2013
- Messages
- 1,404
Also looking for this hardware. One each. Original only wanted (square nut and flat head bolt).
Last edited:
Ron L
VIP MEMBER
- Joined
- Feb 27, 2004
- Messages
- 3,204
I've never seen those type of fasteners used before. Are you certain they are original? The P11 manual calls for 01-2565 which is a hex head 2BA bolt 1/2 inch long.
Ron L
VIP MEMBER
- Joined
- Feb 27, 2004
- Messages
- 3,204
Mike Partridge shows he has a few in stock.
- Joined
- Dec 17, 2009
- Messages
- 126
I think they are gutter bolts and not standard fitment.
- Joined
- Apr 6, 2013
- Messages
- 1,404
I have a set of Mike's new clamps. Aside from looking too shiny and new for this bike, they have different head. Original has a rounded head. I’m missing only one.
Attachments
Last edited:
- Joined
- Apr 6, 2013
- Messages
- 1,404
I believe you both are right.
Here is a photo I found of how they are supposed to be.
Last edited:
Ron L
VIP MEMBER
- Joined
- Feb 27, 2004
- Messages
- 3,204
Why not just get a slotted round head machine screw the proper size and length and use the one you got from Mike?
https://www.boltdepot.com
Last edited by a moderator:
- Joined
- Apr 6, 2013
- Messages
- 1,404
I prefer old original parts. The repro parts stand out too much for this all original bike.
Have 3 old clamps, need one more. If I can't find, I'll weather my new ones from Mike.
Have 3 old clamps, need one more. If I can't find, I'll weather my new ones from Mike.