Reply to thread

Message

thanks dave,

happy new year

my dominracer 750 came with non scrolled rocker spindles and 6 start oil pump gears and

the oil feed to rockers is from timing case banjo bolt

New oil gauge showing operating 2000rpm oil pressure 40psi cold ( Sydney summer 25 C/90F) and 20 to 10 when hot

yes i have put compressed air up and down oil drain n works correctly

yes bike has timed breather

the original non scrolled plain rocker spindles were manufactured undersize allowing oil to flood inlet rockers and hence oil bypassing valve stem seals

new spindles provided instant fix ,no smoke.

with flats correctly fitted towards valves no smoke and plugs running light grey

thank you cheers rod

[QUOTE="domiracer22, post: 332097, member: 8625"] thanks dave, happy new year my dominracer 750 came with non scrolled rocker spindles and 6 start oil pump gears and the oil feed to rockers is from timing case banjo bolt New oil gauge showing operating 2000rpm oil pressure 40psi cold ( Sydney summer 25 C/90F) and 20 to 10 when hot yes i have put compressed air up and down oil drain n works correctly yes bike has timed breather the original non scrolled plain rocker spindles were manufactured undersize allowing oil to flood inlet rockers and hence oil bypassing valve stem seals new spindles provided instant fix ,no smoke. with flats correctly fitted towards valves no smoke and plugs running light grey thank you cheers rod [/QUOTE]

Verification