Reply to thread

1. Offsets https://s3-eu-west-1.amazonaws.com/rgmnorton/fs/pdf/wheel_offsets.pdf


Note they do vary a bit, correct way is to run to offset and then adjust with the front rim being central to the sliders and the rear being in line. To get the rear done fully you need to upend the bike so get the front right and then use the nominal offset for the rear.


2. 8" is the brake size, 9 and 10 are other dimensions.


3. Full width means the hub is the sameish size across the full width. A stronger but heavier hub than 1/2 width.


Back
Top