Norris Magnum 70 Camshaft

Does anyone have any information on a Magnum 70 camshaft that was made by Norris for the Commando? I have had one for a long time now that I purchased along with other bits. I would like to install it in a 74 MK2A that I am currently building but I don't have the timing specs needed, nor any other useful information.
The lobes measure approx. .375 on the Intakes & .345 on the Exh.
From my info it's close to the Combat cam .390 In & .356 Ex, but I,m not sure of the durations.
I would greatly appreciate any information anyone might have to offer; oh, and by the way, no, it isn't for sale.

Ther are a load of cam profiles here"

http://atlanticgreen.com/camsurvey.htm

But none seem to be the one you describe.
If you have a look through them you may find a similar one to use as a starting point.

You could try contacting Norris Cams?

Norris Performance Products (Norris Cams)

14762 Calvert St, Van Nuys, CA 91411-2705, United States

Phone: (818) 780-1102


Presumably this is the same company?

L.A.B. said:

You could try contacting Norris Cams?

Norris Performance Products (Norris Cams)

14762 Calvert St, Van Nuys, CA 91411-2705, United States

Phone: (818) 780-1102


Presumably this is the same company?

Click to expand...

Thank you I'll try contcting them.

I was under the impression that the Norris mortorcycle cam business was sold to MegaCycle years back. You might try contacting MegaCycle as well.
http://www.megacyclecams.com