N15: Center stand spring

Joined
Nov 10, 2012
Messages
3,154
Country flag
Hi.
To day i started with the N15 remounting.
I have a few problems on positioning and loading of the center stand spring.
Goes the hook of the spring in the little hole on the right side of the frame tube beside the stand?
Some pictures would help a lot.
Thank you.
Piero
 
Understood.
The hook side goes into a hole in the right gearbox mount plate.
Ciao
Piero
 
Can anyone tell me how to fit this spring with the engine and gearbox in place please, is it even possible? Any ideas gratefully received. I really don't want to have to start again. Thank you.
 
Can anyone tell me how to fit this spring with the engine and gearbox in place please, is it even possible? Any ideas gratefully received. I really don't want to have to start again. Thank you.
The right side of the rear gearbox fixing plate has an hole were you must hold the spring in upper side.
Bottom side the spring edge goes against the horizontal tue of the same central stand.
 
Yes but you must start with the spring just rotate so that doesnt touch the case.
I have fitted to my N15, G15 and 33 with engine and gearbox in place.
 
Thank you Piero, job done. I had to bend a slightly tighter curve on the smaller arm as it kept slipping out. Very happy.
 
Back
Top