Motorcycle Classics 961 SE magazine article

At 5200 the graph reads right around 46 HP. Torque in ft lbs. from HP = HP x 5252/ RPM or in this case 46 X 5252 /5200 =46.7 ft lbs
Are 5200 and 66 ft. Lbs perhaps the factory at crank numbers?

Glen
 
Hello Simon,

Do you recommend map #77 or #90 for Motad Shorty pipes? I've read both maps and one better than the other. I was told #77 but #90 appears to show more success paired with high flow pipes whether Motad or SBN. Thanks in advance.
 
DallasNorton said:
... Do you recommend map #77 or #90 for Motad Shorty pipes? I've read both maps and one better than the other. I was told #77 but #90 appears to show more success paired with high flow pipes whether Motad or SBN. Thanks in advance.
Click to expand...

Yes, what DallasNorton said. I'd like to understand this before May. :?
 
DallasNorton said:
Hello Simon,

Do you recommend map #77 or #90 for Motad Shorty pipes? I've read both maps and one better than the other. I was told #77 but #90 appears to show more success paired with high flow pipes whether Motad or SBN. Thanks in advance.
Click to expand...


77 is the correct one to use for Commando fitted with after market off road only pipes.
 
NortonFactoryUK said:
DallasNorton said:
Hello Simon,

Do you recommend map #77 or #90 for Motad Shorty pipes? I've read both maps and one better than the other. I was told #77 but #90 appears to show more success paired with high flow pipes whether Motad or SBN. Thanks in advance.
Click to expand...


77 is the correct one to use for Commando fitted with after market off road only pipes.
Click to expand...

Okay then. What MCC has done with my bike should be sufficient. Thanks for the clarification, Simon.
 
You must log in or register to reply here.
Back
Top