Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Follow on, I discovered that with a down draft inlet the pilot jet should be in the body not the float bowl. Running at the hill climb today the needle is totally wrong needing a fist full and no subtle roll on. Will order aMikuni needle as suggested Acotrel.I do have one problem with the anodised slide hanging at 2000 rpm when heating in the line to go off. Amal said to use these slides as the chrome one flake with methanol.I’m riding again tomorrow (Sunday). Can anyone suggest a temporary solution just to get me through the day. I tried spraying the slide with WD40 with little effect?
Follow on, I discovered that with a down draft inlet the pilot jet should be in the body not the float bowl. Running at the hill climb today the needle is totally wrong needing a fist full and no subtle roll on. Will order a
Mikuni needle as suggested Acotrel.
I do have one problem with the anodised slide hanging at 2000 rpm when heating in the line to go off. Amal said to use these slides as the chrome one flake with methanol.
I’m riding again tomorrow (Sunday). Can anyone suggest a temporary solution just to get me through the day. I tried spraying the slide with WD40 with little effect?
