Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Can't locate this carrier on RGM's site, so I've emailed Norvil to enquire about availability and part #Correct, I discovered this by browsing the frame modification threads on this site, Jim Comstock pioneered it I believe, though I intend to use it in addition to front cradle rubbers rather than as a replacement, the other reinforcements I've done (engine cradle etc.) are fairly standard for a commando framed race bike IMO, though the real work will be around reinforcing the stock 750 cases, I'm consulting with Herb on that, but in addition to fabricating a gearbox outrigger, I'll be making a shrink fit plate for the drive side case and gussets for the case-cradle lugs, the trick will be avoiding the need to weld as much as possible (Herb used to bolt his drive side reinforcing plates to the face of the case). Anyway, will be looking to the forum for advice as I move forward
Can't locate this carrier on RGM's site, so I've emailed Norvil to enquire about availability and part #
Correct, I discovered this by browsing the frame modification threads on this site, Jim Comstock pioneered it I believe, though I intend to use it in addition to front cradle rubbers rather than as a replacement, the other reinforcements I've done (engine cradle etc.) are fairly standard for a commando framed race bike IMO, though the real work will be around reinforcing the stock 750 cases, I'm consulting with Herb on that, but in addition to fabricating a gearbox outrigger, I'll be making a shrink fit plate for the drive side case and gussets for the case-cradle lugs, the trick will be avoiding the need to weld as much as possible (Herb used to bolt his drive side reinforcing plates to the face of the case). Anyway, will be looking to the forum for advice as I move forward
