Kill switch bypass

I want to bypass my kill switch. 1975 Mk3 w/ Pazon Altair EI and Podronics R/R. The Pazon has a purple, red and black wire. The Pazon instructions show the black wire going through the switch to the battery. If I wanted to keep the kill switch I would connect the black wire to the WY through the kill switch but I prefer to bypass it. Can I connect the black wire directly to a white wire at the harness to bypass the switch. Should it be a white wire from the ignition switch or does that even matter? Don't need a discussion about the merits of a kill switch but I'm not very good at wiring and appreciate any advise. Thanks!

sadolfsonmark3 said:

If I wanted to keep the kill switch I would connect the black wire to the WY through the kill switch but I prefer to bypass it. Can I connect the black wire directly to a white wire at the harness to bypass the switch.

Click to expand...

Yes, according to the Altair diagram for positive earth/ground.

sadolfsonmark3 said:

Should it be a white wire from the ignition switch or does that even matter?

Click to expand...

All white wires should extend from the ignition switch (terminal 2) so it can be any white.

L.A.B. said:

http://www.pazon.com/files/PDF/AL2-401.pdf

Yes, according to the Altair diagram for positive earth/ground.



All white wires should extend from the ignition switch (terminal 2) so it can be any white.

Click to expand...

Thank you LAB!