Hi all, am now nearing the final stages of my rewire and fitment of relays and fuses, however there is a couple of questions I'd like to put to you to make sure I've got it right, better to be safe than sorry.
http://i411.photobucket.com/albums/pp19 ... usebox.jpg
First one is, in the drawing in the link above you can see have run a wire from the ign switch to the fuseblock and split it to give feeds to the horn & aux. When doing a continuity test I get continuity between all the load ends and all the connections for example, say for instance, at the horn and connections numbered 2 & 3 as well as it's own connection(1), is this because they are all connected together by the fuses?
Secondly, if this is the case and I had different rated fuses for example a 5 amp on the aux and a 15amp on the horn, if there was a problem in the horn's circuit would the 5 amp aux fuse blow first?
Lastly if I have fuses in the fusebox why do I have to have fuses fitted to the relay feeds, is it because the are fed directly from the charging side/battery?
Sorry if that is a simple electrical question,but I would rather make sure!
Thanks
