Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
OK, that is a voltage tester, not a continuity tester. With the turn signal you are checking selected:From the housing of the turn signal to the positive of the battery if the tester lights red, you have no ground to the turn signal. If from the center connector of the turn signal socket to the housing of the turn signal if the tester show red, you are good, if not check from the center of the turn signla socket to the battery positive - if it now light red, you have no ground to the turn signal. If it still does not light red, the turn signal is not connected.Post #25 is for a 71-74 Commando that has turn signals:You pull off the two female spade connectors, use something like a paperclip to connect them together and make sure the paperclip doesn't touch anything else.The amber indicator light in the headlight has two wires - Green/White and Green/Red. Disconnect them from where they are connected.
OK, that is a voltage tester, not a continuity tester. With the turn signal you are checking selected:
From the housing of the turn signal to the positive of the battery if the tester lights red, you have no ground to the turn signal. If from the center connector of the turn signal socket to the housing of the turn signal if the tester show red, you are good, if not check from the center of the turn signla socket to the battery positive - if it now light red, you have no ground to the turn signal. If it still does not light red, the turn signal is not connected.
Post #25 is for a 71-74 Commando that has turn signals:
You pull off the two female spade connectors, use something like a paperclip to connect them together and make sure the paperclip doesn't touch anything else.
The amber indicator light in the headlight has two wires - Green/White and Green/Red. Disconnect them from where they are connected.
