Help with thread size in a hurry!!!

grandpaul

VIP MEMBER
Joined
Jan 15, 2008
Messages
13,548
Country flag
Can anyone tell me the male thread spec on the brake line to a Lockheed caliper pipe nut? I’m at the hydraulic shop and forgot to bring the hose with me. Thanx
 
 
The hose and rigid pipe fittings are not listed as they were not available separately so don't have a part number.
 
Of all things, they put a flare on the tip instead of the reverse. Also, too short of a threaded end fitting.

45 mile round trip tomorrow...
 
And then there is the thrill with the difference in AN fittings and automotive fittings. If things are slow you can peruse the Venhill
catalogue.
 
And then there is the thrill with the difference in AN fittings and automotive fittings. If things are slow you can peruse the Venhill
catalogue.
What is the difference? They are 3/8 UNF fittings used by all the UK car makers at the time
 
What is the difference? They are 3/8 UNF fittings used by all the UK car makers at the time

Therefore the fittings should have a 90-degree tapered seating. AN can also mean (US) Army Navy with a different taper.
Help with thread size in a hurry!!!
 
Back
Top